Wood N Planing

BOTH FACES IN MIND

2-SIDED PLANER SOLUTIONS

WHAT PERFECT SURFACES MEAN.

efficiency redefined

TWO FACES, ONE PASS

Top and bottom cutterheads plane both faces at the same time. Every board leaves the machine flat, smooth and parallel at an exact thickness, ready for every operation that follows.

PLANING WIDTH
on boards 8 to 170mm thick
HELICAL INSERTS
carbide inserts in 6 spiral rows
CUTTERHEAD SPEED
on 101mm diameter cutterheads
FEEDING SPEED
adjustable from 5m/min by inverter
CAPACITY

WORKING DIMENSIONS

Designed for demanding production needs

PRIME

RANGE

Workpiece Height
8~170MM THICKNESS
Workpiece Width
MAX 405MM WIDTH
Workpiece Length Min
MIN 250MM LENGTH
ACCURACY

ELEVATE YOUR SURFACE QUALITY

Good panels start at the planer. A board that is flat and parallel on both faces rips straight, joints tight and glues strong, with less re-work, less sanding and less waste.

SPIRAL CUTTERHEADS

Carbide inserts set in a helix shear the wood fibres progressively for a clean finish, less tear-out around knots and lower noise. Each insert rotates to a fresh edge in minutes.

Top Cutterhead
Bottom Cutterhead

The bottom spindle creates a flat reference face and the top spindle sets the final thickness exactly parallel to it. Together they remove only what is needed from each side: maximum yield, no flipping.

DISCOVER THE ULTIMATE SETUP

FEATURING

TOOLING OPTIONS

Square-edge Inserts

Square edge Inserts
Radius shaped Inserts

Radius-shaped Inserts

Wedge Type Inserts

Wedge Type Inserts
DURABLE

PRECISION ENGINEERING

Investing in a rigid double side planer with a heavy frame and accurate table elevation is crucial for consistent thickness, shift after shift.

HARD CHROME PLATED TABLE

The table surface is hard chrome-plated for exceptional wear resistance and smooth, low-friction feeding.

Sectional Rollers
Sectional Infeed Rollers

Each roller section adapts to its own board, so pieces of different thickness are fed side by side and held firmly through both cutterheads.

AT THE INFEED

SECTIONAL INFEED ROLLERS

5~18M/MIN FEEDING SPEED

10HP TOP + 7.5HP BOTTOM SPINDLES

SAFE START WITH Y-DELTA

DURABLE

USER FRIENDLY INTERFACE

Simple controls designed for the operator: set up the machine in seconds and keep every board on target.

Control Panel
Control Panel

LIVE THICKNESS

Key in the target thickness and the table moves into position automatically.

SPEED CONTROL

Adjust the feeding speed for hardwood or softwood with the inverter.

AUTO LUBRICATION

Lubricant is supplied to the caterpillar chain slideways automatically for seamless operation.

DISCOVER OUR REMARKABLE SELECTION OF DOUBLE SIDE PLANERS

Flat, smooth and parallel on both faces: the starting point for every board you produce.

CONTACT US

Based on your production layout, the perfect machine is waiting for you from a versatile range of double side planers.

ViewBy ticking this form, you agree to our processing of your data in accordance with our Privacy Policy.